Commercial Heater for Warehouse: Simple Tips For Choosing It

Commercial Heater

Whether your products require neutral temperature or you only have to keep your employee’s members warm during the cold winter season, obtaining the ideal commercial gasoline heaters can make all the difference. No one heater will be the right choice for all warehouses. Instead, you need to take the unique attributes of your physical warehouse and its operations into consideration when deciding which commercial gasoline heaters will best suit your needs.

Start By Knowing Your Options

Before you can pick the right industrial warehouse heaters for your space, you want to comprehend the numerous choices that are available on the market. This way, you can evaluate how you can benefit from each option, such as gas heaters. The most commonly used options for industrial warehouse replacements include the following:

  • Unit Heaters
  • Heat Pumps
  • Water Oil / Gas Heaters
  • Steam Oil / Gas Heaters
  • Natural Energy
  • Radiant Heating


  • Unit Heaters

Many commercial buildings will utilize multiple unit heaters to warm up the air throughout their floor space. These commercial heaters for warehouses may operate on various types of fuels, such as natural gas, propane, and electricity. This makes them ideal for choosing the kind of fuel which is more easily available in your area.

  • Heat Pumps

Next up in the industrial warehouse heaters selection is the heat pump. These systems operate to extract warmth from the chilly air. They utilize a refrigerant that pushes the heat throughout the industrial area. The best heat pumps utilize the natural surroundings instead of fossil fuels, which makes them a perfect green alternative for those searching for more environmentally-friendly heating methods. It’s also important to note that heat pumps do come with a substantial upfront expenditure.

  • Water Oil / Gas Heaters

These water-based HVAC systems can utilize either gas or oil as the fossil fuel of choice to power the entire system. These systems use a boiler to heat the water until it turns into steam. The steam is then passed through the radiators in the warehouse to allow off heat.

  • Steam Oil / Gas Heaters

One of the most traditional kinds of heating systems is made via steam by gas or oil. This sort of heating system uses fossil fuels that are boiled. They make condensed and then create steam that is passed through the pipes in a building. It’s important to note that this kind of system demands the boiler to heat up first before the warm steam could be circulated throughout the pipes of the warehouse.

  • Natural Energy

If you think of natural energy, you should consider green energy. This type of heating system uses a sustainable source to power itself. These resources commonly include solar, wind, and geothermal power. These types of heating systems usually do come along with higher than normal installation expenses, but a lot of countries offer considerable tax breaks for businesses that employ organic energy.

  • Radiant Heating

The final type of industrial warehouse heaters that we are going to discuss is shining heating. This utilizes a hydronic radiant system that uses warm water that flows through PEX tubing, which is embedded in the floor or radiant panels of this warehouse. This is a popular choice when developing new buildings where simple access to the ground and walls are readily available. These can be commonly called commercial infrared heaters for warehouses.

The Importance of Destratification

Most warehouses come with high roofs. All these high spaces necessarily trap some of the warm air as it rises to the peak of the building. Traditionally, this warm air would be wasted energy. However, with the concept of destratification, you can reuse this energy to heat your warehouse. This very simple concept entails the use of suspended fans which re-circulate the warm air from your commercial heating system back to the busy floor level.

Factors You Have to Consider

As we discussed previously, each warehouse makeup is going to be different than the next. You will have to estimate your necessities when it comes to heating so that you can determine which kind of system is best for you. Listed below are the top factors you will need to take into account in your decision.

  • Square Footage

At the most basic level, you want to determine the square footage that has to be warmed. This can be as simple as just discovering the square footage of your warehouse. Or, you can break it down further if you want.

While there are lots of factors to take into consideration, like the number of loading docks that are going to be in use throughout the day and the total amount of insulation you have within your warehouse, there is a general guideline about heating per square foot. You should aim for approximately 10 watts of heating power per square foot of your warehouse. As a general reference, one watt of power is equivalent to just under three and a half BTU per hour.

  • The Layout of Your Building

As you learned above, commercial heaters for warehouse come in a variety of choices. Deciding on the perfect one for your warehouse starts with identifying the actual design of your construction. Have you got tall roofs? How many loading docks would you have? Can your employees work on the ground or up high? This will allow you to determine where your heating requirements will be. By assessing these requirements, you can better decide which type of heating system will be able to meet your needs the best.

  • Accessible Resources

Before you can choose the right type of heating system, you’ll have to spot the varieties of available resources enclosing your warehouse. Is there property for a geothermal heat pump to be installed? Do you have enough roof space to put in solar panels? Is oil cheaper than gas in your area? By identifying the kinds of tools that are readily available to your warehouse, you can better restrict your listing of commercial heaters for warehouses that you can choose to utilize.

  • Contemplate Your Space Restrictions

Different commercial heaters for warehouses come in a variety of sizes. Some components may need to be installed at ground level while some can be set up on the ceiling. Knowing the amount of distance you have between the floor and the ceiling is a must. In this manner, you can choose the type of heating system that allows you to utilize your open space best. For example, if your floor area is very limited, you might want to consider a heating system that is ceiling mounted.

  • Maintenance Prerequisites

Before you purchase any commercial heaters for the warehouse, you need to know what sort of maintenance is necessary for the system. The quantity of maintenance that is required will highly depend on the kind of system your purchase and your regular business operations. It is best to speak with an expert in the industrial heating industry to determine the kind of maintenance requirements that will be necessary along with your system.

What to Look For In a Commercial Heating Supplier

Undergoing the decision of choosing the right heating system for the warehouse starts with befriending a commercial heating provider. Here are some necessary traits you ought to be looking for in any commercial heating provider you decide to utilize.

  • Tour Your Facility

As you’ve learned during this entire article, every warehouse differs. Therefore, each warehouse needs its heating combination to fit its requirements appropriately. A fantastic commercial heating provider will not bag a heating bundle over the phone. Instead, they’ll take some opportunity to tour your facility.

They will be looking for various components such as the height of your ceilings, the amount of loading bays you’ve got, and wherever your staff mainly works. These will all be taken into account when giving you a heating solution plan.

  • Warranty and Response Times

When you purchase gas heaters and other heating equipment, you need to ensure that you’re educated about the guarantee that accompanies it. You need to understand what is covered, including parts and labor. You should also have a very clear idea of the reaction time of this heating provider. If your center runs round the clock, then you’re likely to want to have a heating supplier that is available to react to heating issues no matter what hour of the day it is.

  • They Provide a Written Estimate

This factor cannot be overlooked when choosing out a commercial heating provider. Any experienced heating supplier is going to not have trouble drawing up a written estimate for the installation of your new heating apparatus. This is a great way to make sure both you and the heating provider are on the same page about what’s needed and how much it can cost.

If your warehouse is being built or you’re simply on the lookout for a better heating solution, then you know that you have many options out there. Hopefully, you now have a clear idea of what types of commercial heaters are perfect for your location. Next, it is time to get an industry specialist such as Preferred Climate Solutions who can help you through the whole installation process.

Leave a Reply